The protection of a building model generally refers to the protection of a building model after a building has fallen behind. The method of saving the model can be selected according to the length of the saving cycle. If you save the building model for a short time,
Cover with paper, plastic film, or cloth. If the building model is stored for a long time, it can be made of plexiglass cover. Make a transparent plexiglass cover according to the 3D specifications of the building model and cover it
In the shape of the building, it can not only prevent dust, but also decorate the environment. In addition, after making the sand table model, the following methods can be adopted for proper maintenance and protection. Today we will explain this in detail.
1. After the model production is completed, the model production company will designate a special person for transportation. The aforementioned special glass covers should be used before transportation. After the model company's installation and commissioning is completed, the model can be used normally, avoiding unnecessary trouble later!
2. Each model of sandbox model remote control with remote control must be kept strictly, not lost, and not used often, otherwise it will easily cause remote control circuit failure. Don't throw, throw, throw, don't let children play as toys.
3. The place where the sand table model is placed should be kept clean, ventilated, no wind, no sunlight, the model without glass cover should be cleaned frequently, and the dust should be blown regularly with a special soot blower. The model should be supervised by children, and children should not touch it to avoid damage or electric shock.
4. The temperature at the place where the sand table model is placed should not exceed 35 ° C, and the relative humidity should be maintained between 30% -80%, otherwise the sand table model will be easily degummed and deformed. Do not let the sun shine, let alone the sun. Avoid the wind and the sun!
5. The light of the sand table is easy to attract people's attention, but the light of the sand table model should not be turned on for a long time. Turn it off every two to three hours. If there is a real fountain, the sand table model should always check for water (because the water is constantly evaporating). If there is not enough water, add water in time. Once you find that the fountain is not spraying water, turn off the power switch immediately, otherwise it will cause damage.
6. If you need to transfer or disassemble, please contact the custom model company and ask someone to disassemble it for you; if you need to transfer, please protect the model with a plexiglass cover.
