The water surface is one of the often appearing scenery in the building sand table model. Different sand table models behave differently on the water surface. In general, the water surface model is made according to the style and proportion of the building sand table model. So, how exactly is the water surface in the building model made?
1. When making a large-scale water surface of a building model, the height difference between the water surface and the road surface needs to be considered. Generally, the commonly used method is to first empty the water surface part of the chassis, and then paste a transparent organic glass plate or a transparent plastic plate with texture on the empty space according to the design height difference, and use blue self-painting on the transparent plate Just spray the colors below. Using this method to express the water surface, on the one hand, the height difference between the water surface and the bass can be expressed; on the other hand, the transparent plate is under the sun and the blue paint surface of the bottom layer, and its simulation effect is very good.
2. When making a water surface with a small scale of the building model, the height difference between the water surface and the road surface can be ignored. When making, you can use the blue sticky note to cut it according to its shape. After cutting, you can paste according to the location. In addition, it can also be processed by the occlusion coloring method. The method is to stick the masking film to the water surface position first, and then perform the missing engraving. After engraving, spray color with blue self-painting. After the paint is dry, remove the masking film.
There are many ways to make the water surface in the building model. In order to better display the real effect of the building sand table model, many dynamic models have been used to make the model.
