Industry knowledge: Making of dust cover for DIY cabin
You know that our products DIY mini Dollhouse can add with dust cover. However, many people they don’t know how to make it. And how to make it clear and perfectly. So this time let me tell you about the best way to stick the dust cover well. Don’t go away and follow me to do it.
Here a sample and it very clear to show you how to make it.
Actually, most of our dust cover have 3 pieces, and as i show you the picture below:
Okay, we go ahead, next we continue:
The kraft paper that has been ripped off faces inwards, and the kraft paper that has not been ripped out faces out wards.
Use J03 to fix the junction of two pieces of plexiglass, (use transparent tape to replace J03)
The junction of every two pieces of plexiglass needs to be fixed with J03 (to prevent the plexiglass falling off)
stick appropriate amount of glue to the interface of the two pieces of glass and scrape it slightly
To make the glue penetrate into the junction of the two pieces of glass (the red line is the
Plexiglass interface)
The junct ion of two pieces of plexiglass needs to be fixed with J03 (to prevent the plexiglass falling off)
stick appropriate amount of glue to the interface of the two piece so of glass and scrape it slightly . to make the glue penetrate into the junction of the two piece so of glass (the red line is the plexiglass interface)
The junct ion of two pieces of plexiglass needs,to be fixed with J03 (to prevent the plexiglass falling off)
stick appropriate amount of glue to the interface of the two pieces of glass and scrape it slightly to make the glue penetrate into the junction of the two pieces of glass (the red line is the Plexiglass interface)
the dust cover need to be glued 8 interfaces
Leave it for 1 hour. After the glue dries out, tear off a layer of kraft paper outside the plexiglass
tear off a layer of kraft paper outside the plexiglass
Finally, Above are the skill of make the dust cover well. You can try to do it follow the step.
www.hongda-diyhouse.com
