1. After the model production is completed, the model production company should be equipped with professional transportation staff. The special glass covers mentioned above should be used before delivery. After installing and debugging the model company, you can use it normally to avoid unnecessary trouble later.
2. Each type of sandbox remote control with remote control must be stored carefully, not to be lost, and should not be used frequently, otherwise it may easily cause remote circuit failure.
3. The sand table model should be kept clean and ventilated, without wind and sun, and the model without glass cover should be cleaned frequently. Use special soot blowers to blow soot regularly. The model should be supervised by children and must not be in contact with children to avoid damage or electric shock.
4. The position of the sand table model should not exceed 35 degrees Celsius, and the relative humidity should be between 30% and 80%. Otherwise, the sand table model can easily debond and deform. Don't let direct sunlight, let alone direct sunlight. Avoid wind and sun!
5. The light of the sand table is easy to attract people's attention, but the light of the sand table model should not be turned on for a long time. It will shut down every two to three hours. If there is a real fountain, the sandbox model should always check for water (because the water is constantly evaporating). If water is insufficient, replenish it in a timely manner. If you find that the fountain is not spraying, you should immediately turn off the power switch, otherwise it will cause damage.
6. If you need to transfer or disassemble, please contact the customized model company for disassembly. If so, protect the model with a plexiglass cover!
